Quick help - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Quick help (/showthread.php?tid=20974)

---

Quick help - 1230AM - 02-11-2020

At the risk of a violation - In addition to my prior Low AM Volume question, (On a Philco) I have a non-Philco radio with a Numite Condenser Cat. No. AT 8450 reading cap.8 and 450v.  Just to be clear, is this merely an 8mf capacitor?

Radio has a hum and this is the only cap not replaced.  Its a large one and I suspect this to be the issue.

Thank you and my apologies for posting a non-Philco question.....But this hopefully is generic and will be the last non-Philco question I ask.

---

RE: Quick help - Radioroslyn - 02-11-2020

I would think that it's an 8mfd. An .8 would pretty small in physical size by comparison. 10mfd would be a suitable replacement as I don't know if the 8's are a common value anymore. Old school tubular 8mfd@450v would be abt 1" in dia and 2 to 3" long.
Here @ the Philco Phorum we are a non discriminatory radio phorum however we do have a special section for "other radios"

---

RE: Quick help - 1230AM - 02-11-2020

Thanks!  What you describe would be it.  Thanks again for the confirmation.

---