Philco 37-630 Shadow Meter Bypass - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 37-630 Shadow Meter Bypass (/showthread.php?tid=21367)

---

Philco 37-630 Shadow Meter Bypass - Micro9 - 05-28-2020

Any way to bypass a missing shadow Meter on a philco 37-360?
It is the later version meter.
pn: 45-2189
TKS!

---

RE: Philco 37-630 Shadow Meter Bypass - Radioroslyn - 05-28-2020

The coil is about 800-1000 ohms. The value isn't very critical.

---

RE: Philco 37-630 Shadow Meter Bypass - Micro9 - 05-28-2020

It's a code 125.It looks like the radio should work without the meter in place.
I am correct??
TKS!!

---

RE: Philco 37-630 Shadow Meter Bypass - Radioroslyn - 05-28-2020

I didn't see a resistor across the meter in the diagram. You can check the screen grid voltage on the IF amp and the mixer. If it's very low you need the resistor.

---

RE: Philco 37-630 Shadow Meter Bypass - Micro9 - 05-28-2020

I put a jumper across where the meter leads are and the radio came up.
thanks to everyone for all your help!!

---