Put new speaker to the philco model 90 and it does nothing - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Put new speaker to the philco model 90 and it does nothing (/showthread.php?tid=21477)

---

Put new speaker to the philco model 90 and it does nothing - locuspiolin - 07-14-2020

Hello friends:
I bought a philco model 20 radio about 8 years ago, but the wooden grille needs to be restored, but hey, the speaker was missing. stations with the speaker that I bought that can be to see if I have time and I will send you photos I would like if someone has the technical sheet.
A greeting.

---

RE: Put new speaker to the philco model 90 and it does nothing - morzh - 07-14-2020

https://philcoradio.com/library/download/service%20info/wiring%20diagrams/vol1/split/Part13-Philco%20Wiring%20Diagrams%20Vol.%201.pdf

This is the schematic.

As for the speaker, I am not sure what you meant. Is it missing or do you have a new one?
This Google translation is very, very confused.

---

RE: Put new speaker to the philco model 90 and it does nothing - Radioroslyn - 07-14-2020

Hi,
https://philcoradio.com/library/index.php/parts/speakers/
Go to page 4 and what you are looking for is called a "K" speaker.
This lists the specification of the original speaker. A replacement
output transformer would be 6000 ohms center tapped and
secondary to match the voice coil.

Hope this answers your question.

---