Philco 46-1203 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 46-1203 (/showthread.php?tid=21519)

---

Philco 46-1203 - vecher - 08-02-2020

Just started to work on a 46-1203.. found that the resistor R2 ( 50,120 ohm) was missing.. Question what power rating do I need for a replacement ? this is the resistor the is in the filament string..

This radio uses a 50X5.. Not the 50Y6GT

Thanks
Skip

---

RE: Philco 46-1203 - David - 08-02-2020

Posting a link with info looks to be 2 watt.    http://www.nostalgiaair.org/Resources/585/M0013585.htm      If it was mine due to higher line voltages would go with 3 or 5 watt if they would fit.

---

RE: Philco 46-1203 - vecher - 08-12-2020

Is there a way to check to see if the electronics are bad or the cartridge is bad.. i get no sound when either touching cartridge or scraping the needle..

Skip

---

RE: Philco 46-1203 - Radioroslyn - 08-12-2020

Did you get the radio side of things working??

---

RE: Philco 46-1203 - vecher - 08-12-2020

YUP Working great..

Skip

---

RE: Philco 46-1203 - Radioroslyn - 08-13-2020

As Norm said you need a cartridge. Drop Kirk a note and he can help you pick a suitable replacement.

---

RE: Philco 46-1203 - vecher - 08-13-2020

Thanks

Will do

Skip

---