38-116 dial replacement - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: 38-116 dial replacement (/showthread.php?tid=21897)

---

38-116 dial replacement - mg34.42 - 12-07-2020

i did a search on the site and did not see anything so can someone tell me how to replace the dial on a 38-116 are there any phots out there 
benny

---

RE: 38-116 dial replacement - Radioroslyn - 12-08-2020

The 37-116 is pretty much the same. There was two version or what Philco calls codes. The 37-116X code 121 was a manual tuning set made during the 1st half of the model year. It was a poor seller but command a good dollar nowdays. It's very different from your setup.The 37-116 code 122 is overall very much like the 38-116X, same tuning scheme. 

In saying all this have a look at the 37-116 dial disasembely. Oh the 37-675X does too.

GL

---

RE: 38-116 dial replacement - rfeenstra - 12-08-2020

What exactly are you looking for? How the dial is assembled, or where to get a replacement for the dial? I have pics of the disassembly of 2 37-116's and 1 38-116. I think I can come up with enough pics to show how the assembly is put together.

---

RE: 38-116 dial replacement - 462ron - 12-08-2020

Benny, give this link a look see. It’s from the Philco Repair Bench website and has a detailed view and instructions on the 37-116 mechanism which should be close to what you’re looking for!

https://www.philcorepairbench.com/wp-content/uploads/2017/12/philco-auto-tuninig-dial-service.pdf

Ron

---

RE: 38-116 dial replacement - mg34.42 - 12-08-2020

well i just ordered a new dial from radio daze and what i am looking for are instruction's or photos of how the dial comes apart so i can replace my dial. ron that looks like a good start thank you

---