Philco 38-3 Reassembling the dial - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 38-3 Reassembling the dial (/showthread.php?tid=21938)

---

Philco 38-3 Reassembling the dial - Oscar Hernandez - 12-18-2020

Dear Friends
I have the dial completely disassembled, and need your help to put it back.
I have pics of 15 parts that would like to put together on the chassis as it was originally
I have attached a pic of a similar cabinet and a close up of the dial
Some parts I could figure out where they go, but the small parts are the ones I have no idea where they go
Thanks in advance for your help
P.S. Would like to hear something like, part x go along with part y in the back of part z, something like that. If any of our friends could share a process step by step of this work, it would be great
Unfortunately, I have no way to post all the 17 pics due to that I have reached the maximum allowed.

---

RE: Philco 38-3 Reassembling the dial - klondike98 - 12-18-2020

I don't have any personal experience with one of these but here's a link to a previous thread on a 38-3 dial that might be helpful.
https://philcoradio.com/phorum/archive/index.php?thread-19180.html

---

RE: Philco 38-3 Reassembling the dial - klondike98 - 12-18-2020

Also...you can also reply to your own post (with the "New Reply" button) and post additional pictures that way.

---

RE: Philco 38-3 Reassembling the dial - Oscar Hernandez - 12-20-2020

Dear Friends
It looks as if I finished reassembling the dial, but, there a loose piece that I coun't figured out where it belongs
If you have this info, please help to finish this project
Regards

---