41-680 bol changer - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 41-680 bol changer (/showthread.php?tid=22109)

---

41-680 bol changer - Forrest - 01-28-2021

Hello I’ve got a 41-680 with a beam of lite changer 4 wires are coming out of the tone 
Arm two come from the sensor to rca jack mounted on terminal strip along with two screw terminals one has black wire with spade lug theses go to the lite there’s no wire from radio to run the lite. I am wondering what voltage the lamp runs at is it filament voltage?
Lamp is good shows resistance.
Forrest.

---

RE: 41-680 bol changer - Radioroslyn - 01-28-2021

I think you mean a 41-608?
The lamp is powered from the bottom winding on #9.
You'll need a rf volt meter to measure it.

Part55-Philco 1941 RMS Year Book.pdf (philcoradio.com)

---

RE: 41-680 bol changer - radiorich - 01-28-2021

Hello Forrest,
welcome to the wild world of Philco's beam of Light   
I also have a one in my collection too but my model is a single record player and loads through a slot like a car   cd player

---

RE: 41-680 bol changer - Forrest - 01-28-2021

Hello,
Thank you terry for the reply yes it is a 41-608 sorry about that, yes I figured it out got the lamp lit and it lasted about 45 seconds and went out. I guess there no longer available I’m going to try building a rectifier off the filament supply to run a #47 bulb
Radiorich I’ve never heard of something like that how old is it?

---

RE: 41-680 bol changer - Radioroslyn - 01-28-2021

Might give a #55 lamp a try.

---