Model 43 Question regarding metal case condenser - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Model 43 Question regarding metal case condenser (/showthread.php?tid=22142)

---

Model 43 Question regarding metal case condenser - Masonparker - 02-10-2021

I'm working on the dual speaker section of the 43 and I have a metal case condenser marked 06477.  Based on the schematic I believe this is item 81 part number 05150 which is a .5mfd. I was hoping someone can confirm that replacing this with a .5 mfd is correct.

Thanks for the help 

---

RE: Model 43 Question regarding metal case condenser - radio1 - 02-10-2021

Yep, probably .5 paper. See https://philcoradio.com/library/index.php/parts/paper-condensers/

Not familiar with this placement, looks like a smoothing cap on the output trans or field coil (probably field) of that speaker, not sure. 'C' is the rectifier filament, 'D' is a resistor to the rectifier plate's negative.

---

RE: Model 43 Question regarding metal case condenser - Masonparker - 02-11-2021

thanks for the confirmation

---