Canadian Philco Model 870 - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Canadian Philco Model 870 (/showthread.php?tid=2251)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Canadian Philco Model 870 (/showthread.php?tid=2251)
Canadian Philco Model 870 - Guest - 02-28-2010
I am new to the forum and submitted this message just before the site went down and it appears to have vanished. Please excuse me if this is a repetition!
As my second attempt at reviving an AA5 set, I am working on a Canadian Philco Model 870 which is built on a printed circuit board. I have checked all of the schematic sites known to me and have been unable to locate this model. I was wondering if anyone on the forum would know if there was an equivalent American model under a different number which I could look up.
Thank you for your help.
Joseph
Re: Canadian Philco Model 870 - Ron Ramirez - 02-28-2010
Joseph
Sorry about that. And here I thought I had managed to save all of our postings!
Can you provide a photo of your 870? How many tubes? What are the types of tubes used? AM? AM/FM? ???
You might want to check with Just Radios - they may be able to furnish a schematic of your set, as they are able to supply schematics for Canadian Philcos.
http://www.justradios.com/schematics.html
Re: Canadian Philco Model 870 - Arran - 03-01-2010
It sounds like an early to mid fifties model at the oldest if it has a PC board, I may have a schematic for that set but no guarantees as the schematics I have are loose leaf folders and not in a manual.
Best Regards
Arran
Re: Canadian Philco Model 870 - Guest - 03-02-2010
My thanks to Ron and Arran for their replies about my Canadian Philco Model 870. It is a fairly standard 5 tube AM only set on a printed circuit board. The tube line-up is as follows:
50C5
35W4
12BE6
12AV6
12BA6
Arran, if you do have a schematic, I would be happy to send you my address and pay you for a photocopy.
Thank you again.
Joseph
Re: Canadian Philco Model 870 - Arran - 03-06-2010
I looked through my binder and I couldn't find a Canadian model 870 but found a few American Philco diagrams from the early 1950s that use a circuit board chassis. I may have a diagram from a similar American set, could you describe the cabinet and the chassis? Is it a clock radio? I could scan them and email them to you.
Best Regards
Arran