Philco 48-1264 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 48-1264 (/showthread.php?tid=23084)

---

Philco 48-1264 - vecher - 12-07-2021

Started to do a 48-1264 radio /Phono.. However The schematics I have are not very eligible.. Does any one have a clean copy?

First problem is the output transformer.. I think the DC reading are 300 Ohms one side and 250 ohms other I get about 150 ohms each side so about 1/2 of what schematic says.. Providing I read it correctly very blurry



Skip

---

RE: Philco 48-1264 - morzh - 12-08-2021

Make sure the outer ends of primary are not shorted in some way (like shorted cap in between). That will result in half-reading.

---

RE: Philco 48-1264 - Ron Ramirez - 12-08-2021

The schematic for the 48-1264 is in the Library:

https://philcoradio.com/library/download/service%20info/yearbooks/1948-1949/split/Part39-Philco%20Home%20Radio%20Yearbook%201948-1949.pdf

---