Speaker plug - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Speaker plug (/showthread.php?tid=23411)

---

Speaker plug - quick573 - 03-27-2022

I need to replace the female socket on my 38-116. I can't find anything that fits. I would replace the male plug on the speaker if I could find a pair of five pin plugs that i could attach the male end to the speaker frame like the old one. any thoughts?  Thanks   Frank

---

RE: Speaker plug - radiorich - 03-27-2022

Hello Frank,
maybe post a photo of the mating side because I have lots of connectors like that .

sincerely Richard

---

462ron - 462ron - 03-28-2022

Check radiodaze, they might have something you could make work!

Ron

---

RE: Speaker plug - Steve Davis - 03-28-2022

Does it look like this    https://www.ebay.com/itm/284722368985?hash=item424ac691d9:g:~NwAAOSwUjtiPHrJ    

Steve

---

RE: Speaker plug - quick573 - 03-28-2022

Steve Davis...Yes that's it. don't know if I can get the wires unsoldered and out.. Need new harness. Old insulation is crumbling. Frank

---

RE: Speaker plug - quick573 - 03-28-2022

Picture of plug and socket

---

RE: Speaker plug - radiorich - 03-30-2022

Hello Quick,
I have a very similar plug on my General Electric 1940 Console my wire was also bad, so I used heat shrink and spliced modern wire on it for now than when get time I am going to drill out that rivet in the middle .
Sincerely Richard

---

RE: Speaker plug - quick573 - 03-30-2022

Rich, the riveted disk is in bad shape. If I can't find a good used socket I will take your advice.  Thank you, Frank

---