Philco 41-90 output transformer 32-8100 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 41-90 output transformer 32-8100 (/showthread.php?tid=2370)

---

Philco 41-90 output transformer 32-8100 - kd4pqf - 05-02-2010

I decided to start to work on my 41-90 since it a less complicated unit. I have ordered my Cap's
my problem is I would like to get some info on my output transformer which is a 32-8100. Is there
a link I can go to to get the specs on this, or a good book, to be able look up this kind of info.

Thanks
Bruce

---

Re: Philco 41-90 output transformer 32-8100 - Ron Ramirez - 05-02-2010

Hi Bruce

The 1946 Philco parts catalog states that this transformer has a 25K ohm primary impedance, 3 ohm secondary. It's rated at 4 watts output although I doubt the 41-90 is capable of even putting out 1 watt since it is a small battery-operated receiver.

---

Re: Philco 41-90 output transformer 32-8100 - kd4pqf - 05-02-2010

OK thanks for the info and where can i get a parts catalog?
Thanks for all the help.

---

Re: Philco 41-90 output transformer 32-8100 - denver - 05-02-2010

Find some great info here http://www.radiomuseum.org/r/philco_41_90.html
Kent.

---

Re: Philco 41-90 output transformer 32-8100 - kd4pqf - 05-04-2010

I got luck and found one on ebay 25k to 4 ohms
just waiting on caps to get started. Thanks for
everyone's help.

---