Need Wiring Data 41-300 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Need Wiring Data 41-300 (/showthread.php?tid=2427)

---

Need Wiring Data 41-300 - hyounce - 06-03-2010

Can anyone tell me where to hook up the left side of this tuning capacitor, on my Philco 41-300. Somehow, it got left out of the re-wiring process, and my copy of the wafer switch is too poor to read.

---

Re: Need Wiring Data 41-300 - Ron Ramirez - 06-17-2010

[Image: http://i326.photobucket.com/albums/k420/mrphilco/ARF/DSC01321.jpg]

This wire goes under the chassis to the band switch, to the wafer section closest to the end of the chassis, down underneath. I could not make out exactly what terminal the wire goes to, sorry. As shown in the photo below, you can't even see the wire coming through the hole:

[Image: http://i326.photobucket.com/albums/k420/mrphilco/ARF/DSC01323.jpg]

Looking at the schematic, I see that the wire goes to terminal 12D. Wafer D is closest to the end of the chassis, and terminal 12D would be on the bottom (of course!).

---