One wire to go 40-190 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: One wire to go 40-190 (/showthread.php?tid=24492)

---

One wire to go 40-190 - N9BQA - 08-04-2023

First hello to every one. This is my first time posting on here (Novice). I am working on a 40-190 that someone started before the got over there head. I have one wire left and i can't find where it goes. I have added a picture of this Yellow wire and the print as well.

Your help is greatly appreciated,
Paul


   
   

---

RE: One wire to go 40-190 - Radioroslyn - 08-04-2023

Looks like terminal 5 on coil #18 methinks.

de
N3GTE

---

RE: One wire to go 40-190 - RodB - 08-04-2023

I have just started restoring a 40-180 and I believe they both have the same chassis. I won't be home until Monday so if you can wait that long I will verify the connection.

---

RE: One wire to go 40-190 - RodB - 08-07-2023

Hello Paul, I just checked the chassis of the 40-180 I'm working on and your yellow wire attaches to pin 5 of the 1232 tube just below the switch assy. Pin 5 is the internal shield of the tube and is wired to chassis ground. Look at the blue wire in the photo below. I used a pencil as a pointer.

   

---

RE: One wire to go 40-190 - N9BQA - 08-07-2023

RobB,

Thanks that make senesce now I can finish this radio and get to its owner.

Thanks again,

Paul
N9BQA

---