Philco 41-226 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 41-226 (/showthread.php?tid=24727)

---

Philco 41-226 - Jimradio - 11-20-2023

Hello guys, working on this radio I found that the volume control was replaced because the on/off push button was not working. A volume control with on/off switch was installed. The volume is down so I checked the control it is stamped Philco 45-5001-8 when I measure it, it measures 1 meg, the schematic shows the volume control should be 500K. I couldn't find info on the 45-5001-8 to make sure.
Can someone tell me that the 45-5001-8 is indeed a 1 meg. I may have to put in a 500K, to get more volume.

Thanks
Jim

---

RE: Philco 41-226 - patrician56 - 11-20-2023

Here is page 62 of the Philco Parts Catalog (as found on this site). The first volume control listed is your replacement part. Hope this helps.

---

RE: Philco 41-226 - Jimradio - 11-22-2023

patrician56, thank you. I temporarily wired in a 500K control, what a difference, today I will change it out.

Love this Phorum

---