Static in volume control? - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Static in volume control? (/showthread.php?tid=2478)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Static in volume control? (/showthread.php?tid=2478)
Static in volume control? - marcapra - 06-28-2010
I have a 1928 radio that was just rebuilt, but it still has excessive static. The repairman asked me to tap the tubes to see if that caused loud static, but it didn't. I discovered that touching or turning the volume control knob caused very loud static that continues for awhile even after I stop turning it. Any ideas as to what's wrong? Thanks.
Re: Static in volume control? - codefox1 - 06-28-2010
The control probably needs to be cleaned or replaced. I would suggest you use DeOxit or tuner cleaner. You have to get the stuff into the control for it to work. Then it needs to be rotated back and forth a few times with the power off. Let everything dry out for an hour or two before powering up again.