Bogen DB10 Capacitor question - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Bogen DB10 Capacitor question (/showthread.php?tid=24917)

---

Bogen DB10 Capacitor question - notcalibrated - 02-26-2024

I have a Bogen DB10 with two 4x5uF multisection caps. The lowest value replacement I can find is a 4x10uF by CE. 

Would this be an appropriate replacement? 

PDF schematic attached.

---

RE: Bogen DB10 Capacitor question - notcalibrated - 02-26-2024

Screenshot attached.

---

RE: Bogen DB10 Capacitor question - morzh - 02-26-2024

If you mean the places where you have 5uF caps (the power filter is 2x10uF) then, yes, they will not adversely affect anything.

---

RE: Bogen DB10 Capacitor question - radiorich - 02-27-2024

Hello notcalibrated,
If this was my Ampifier I would use two 4.7ufd Film Capacitors like these Panasonics that I use that rated at 630 volts They are very good capacitors and only cost couple dollars each .

Sincerely Richard

---