The PHILCO Phorum
Philco plastic dial covers - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Philco plastic dial covers (/showthread.php?tid=255)


Philco plastic dial covers - Guest - 02-08-2006

Hi all, Had 2 Philcos that needed new dial covers. Found a site by Eddie Brimer that gave instructions on how to make your own. It works very well! The first was 47-205 which was my first attempt-took me 3 tries to get it decent. Make sure EVERYTHING is clean-One small unseen speck of dust shows up on the new dial cover! Found out the 1/8" stock I was using did not produce the original depth of the dial cover. Used 1/4" stock and that turned out fine. The second was a 38-14 and the 1/8" stock was perfect for this radio. I am pleased with the results and want to thank Eddie for providing the info. My wife is used to me putting radio stuff in the oven now that I have gotten my own cookie sheets to put stuff on-I ruined most of her original ones which I have replaced! Kenny Kidd

- Chuck Schwark - 02-08-2006

How about posting a few pics here so we can see? Icon_smile

- Robbie Roberts - 02-08-2006

What is the web site address? I need to do at least one...
Scott

- Chuck Schwark - 02-09-2006

Here, in this messge thread. See the FAQ link at the top of the page. Then go to the BBCode faq.

- Robbie Roberts - 02-09-2006

I'm not finding it, Chuck- or am I missing something?
Scott

- Ron Ramirez - 02-09-2006

Scott, are you referring to this?
http://members.aol.com/EB062559/DIALCOVERS.html

- Robbie Roberts - 02-09-2006

Yes! Perfect! Thanks, Ron!
Scott