37-650 shadow meter installation. - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 37-650 shadow meter installation. (/showthread.php?tid=2554)

---

37-650 shadow meter installation. - Guest - 08-29-2010

After many trials and tribulations with this unit, it plays perfect, the cabinet has been professionally redone, and I come to the last item putting the D**n thing back in the cabinet. The radio, with new chassis grommets fits perfectly, but I cannot seem to figure out how to re-install the shadow meter. When using the clips in the cabinet - it does not seem as if the radio will slide in correctly.

[Image: http://antiqueradios.com/gallery/d/121548-1/fit.JPG]

---

Re: 37-650 shadow meter installation. - Ron Ramirez - 08-29-2010

Your escutcheon is upside down.

The clips that hold the shadow meter in place are at the top rear of the escutcheon.

---

Re: 37-650 shadow meter installation. - BDM - 09-25-2010

Oooopsy

---