40-180 Barrel Antenna Hookup - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 40-180 Barrel Antenna Hookup (/showthread.php?tid=26458)

---

40-180 Barrel Antenna Hookup - tfonzart - 04-29-2026

So after looking across various forums, there seems to be a difference of opinion on where the four leads from the barrrel antenna go on the back of the 40-180 chassis 1-4 terminals  and which of those terminals goes to the SW at the top of the console.

Also, there is a two terminal section ANT and GND - are these used at all with the barrel in the console or is this for a different antenna. 

Any advice here (especially pictures) is greatly appreciated!

---

RE: 40-180 Barrel Antenna Hookup - tfonzart - 04-29-2026

Hold up, I just found it in the upper left of the schematic. Sorry!

---