Philco 90, 2-47 metal can capacitor block - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 90, 2-47 metal can capacitor block (/showthread.php?tid=26617)

---

Philco 90, 2-47 metal can capacitor block - Mikeym53 - 07-13-2026


I am working on a model 90 with 2-47 output. The metal can capacitor #23 in the schematic Philco part number 04407 is listed with four capacitors. 2-.25uf and 2-.5uf. the schematic shows all four #23 capacitors, but not their values. I have circled the capacitors in the schematic attached. Please let me know which ones are which. Thank you in advance. Mike

---

RE: Philco 90, 2-47 metal can capacitor block - Jhunt - 07-13-2026

Here you go!

---

RE: Philco 90, 2-47 metal can capacitor block - Mikeym53 - 07-13-2026

Jhunt, thank you very much! Having a schematic with values will make it easy to complete the restoration. Good job! Mike

---

RE: Philco 90, 2-47 metal can capacitor block - Steve Davis - 07-13-2026

Actually, you could use .5uf (or .47) for all four

Steve

---

RE: Philco 90, 2-47 metal can capacitor block - Mikeym53 - 07-16-2026

Thanks to all for the response. I used 2- .22, and 2-.47, like the schematic shows. The radio plays great! Thank you, Steve and Jhunt. Mikey

---