Plug Voltages Needed For A 1943 CRV-20130 Power Supply - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios/Phonographs (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Plug Voltages Needed For A 1943 CRV-20130 Power Supply (/showthread.php?tid=26775)

---

Plug Voltages Needed For A 1943 CRV-20130 Power Supply - Tonym4704 - 10-24-2026

Hello Everyone,
I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power supply. This is the supply that is used with a 1943 Navy RBB receiver. My plan is to tap into the unit to operate a 1945 Navy RBM-5 radio that requires 205v DC and 12v AC. I would appreciate any information or advice regarding the proper way to do the procedure. Thank you.
Paul

---

RE: Plug Voltages Needed For A 1943 CRV-20130 Power Supply - David - 10-24-2026

Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.php/PE-75

---