The PHILCO Phorum
Repairing a PT2 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Repairing a PT2 (/showthread.php?tid=2736)



Repairing a PT2 - Easy-E - 12-12-2010

I just bought a PT2 and it does not work. Two wires are disconnected; the black wire from #3 terminal on the transformer(?) and one of the white wires that comes off of the bottom speaker lug. On the speaker lug the wires that are connected are the one from #6 terminal on the transformer to the middle lug on the speaker and the other white wire on the bottom lug of the speaker is connected to a mount on the frame in the back left (looking at the rear of the radio)behind the tuner. I am new to radios and any help is appreciated!! Lastly, is there anywhere to get an original back cover for this radio, mine is missing. Thanks-E


Re: Repairing a PT2 - Carl Travis - 12-12-2010

Here's the schematic for your radio:
http://www.nostalgiaair.org/PagesByModel/125/M0014125.pdf
There is a reproduction back available:
http://retro-tronics.com/itemDetails.php?shortDesc=Philco+PT-2+Radio+Back+%28Black%29