Toner or Clear finish first?? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Toner or Clear finish first?? (/showthread.php?tid=2804)

---

Toner or Clear finish first?? - TA Forbes - 01-13-2011

Audin's previous message piqued in me a question I have had for some time.....
When finishing cabinets, what do you prefer to apply first? Toner, then Clear, or Clear, then Toner ?????

From conversations that I have had with other collectors, this is kind of a "boxers or briefs" question.

Comments????

---

Re: Toner or Clear finish first?? - Ron Ramirez - 01-13-2011

I've never heard of it being done any other way than toner first, followed by clear. Unless there was a need to seal the cabinet first, often with shellac. Then this is followed by toner, then clear.

---

Re: Toner or Clear finish first?? - Steve Davis - 01-14-2011

Tom,
Toner first, then clear. If you don't have clear over the toner, the slightest scrach in the toner coat will show. Where a minor scrach in the clear top coat may not even show.
Steve

---

Re: Toner or Clear finish first?? - Ron Ramirez - 01-14-2011

Thanks, Steve. I thought that was correct...but cabinets are not my "specialty," I much prefer working on the chassis of old radios.

---