Transitone Information Model 2 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco-Transitone Auto Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=7)
+--- Thread: Transitone Information Model 2 (/showthread.php?tid=2876)

---

Transitone Information Model 2 - 33pd - 01-30-2011

I have a tube radio that inside has a label that says Philco Transitone Model 2. It is the tube unit only I do not have the dash piece with the dial pieces. I received this with a truck load of 1928- 31 Model A Ford parts. Any information on this is greatly appreciated. I am going to attempt to attach a couple of images of it. Thanks,, AL

Note from site admin: Sorry, but the photos which were attached to this post are no longer available.

---

Re: Transitone Information Model 2 - BILL - 02-01-2011

It is a CT 2 ,it was built for the 1935 Chrysler,DeSoto,Dodge and Plymouth, depending on witch head control it had, the Airflow used a different radio, I've owned and worked on a few of these.
I once had a PT 2 that was built for the 1935 Packard, same radio only with an external speaker.

---

Re: Transitone Information Model 2 - Jay - 01-30-2012

Bill: if you have worked on the C T2 chassis, do you have voltage readings for all the tubes? I could use that info to help me fix the CT2 I am trying to fix right now.
Also, on the tube pin layout, does pin one start just to the right of the 2 bigger pins?
Your help will be greatly appreciated by me. I am not very familiar with 1930s car radios.
Jay

---

Re: Transitone Information Model 2 - Radioroslyn - 01-30-2012

Hey Jay
If you need the pin outs go here and down to about the middle there you will find a drawing of them.
http://www.philcoradio.com/phorum/showthread.php?tid=2161
Terry

---

Re: Transitone Information Model 2 - Radioroslyn - 01-30-2012

Here's the info on it: http://www.nostalgiaair.org/PagesByModel/977/M0013977.pdf
Terry

---