PREDICTA... - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Television (https://philcoradio.com/phorum/forumdisplay.php?fid=10)
+--- Thread: PREDICTA... (/showthread.php?tid=3303)

---

PREDICTA... - Big Dave - 05-26-2011

After a few years and a few headaches, mine is finally restored. I have reason to think mine was used by either Holiday Inn or Howard Johnson's. I still need to play with 6DR7's, since the vertical isn't perfect, but it works.

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.

---

Re: PREDICTA... - Marsupial - 05-26-2011

that's a nice set for sure!

---

Re: PREDICTA... - Big Dave - 12-16-2011

I confirmed slight leakage in the vertical output tube. Now, the linearity is as close as I can get it. Here's a better shot.

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.

---

Re: PREDICTA... - Radioroslyn - 12-18-2011

Nice looking set! Good job. I've got a Siesta that's on my todo list one of these years. I hear they are kind of a pain to work on.
http://www.flickr.com/photos/42774321@N08/3939013159/in/photostream/
It should say I haven't had a chance to check it over...
Tnx for posting. It gives some of slow pokes some encouragement.
Terry

---

Re: PREDICTA... - magicclocks - 01-17-2012

I just seen a predicta sell on ebay for $1800.00 wasnt the same model but close

---