Philco Model 84 - Bad Transformer? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco Model 84 - Bad Transformer? (/showthread.php?tid=3972)

---

Philco Model 84 - Bad Transformer? - Brian - 11-23-2011

I have a Model 84 and I think the transformer bad ... I going to check the current as suggested, but if it is bad (and I really think it is) what are my options?

Does anyone sell new, used or re-wired transformers for old radios? How much $$$ do you think it's going to cost? How hard is it to re-wire myself, and is any on-line help or information on the topic?

Thanks
Brian

---

Re: Bad Transformer? - Radioroslyn - 11-25-2011

Hi Brian and welcome to the Phorum
It's probably best to start a new topic (thread) for your question as it could be easily confused with the current one. Happy to answer your question there.
Terry

---

Re: Philco Model 84 - Bad Transformer? - Ron Ramirez - 11-25-2011

I split the two posts above from the original topic. Since this is a question about a different model, it does need to be in its own separate topic. Now it is

---

Re: Philco Model 84 - Bad Transformer? - Radioroslyn - 11-25-2011

Tnx Ron and Happy T Day!
So Brian,
Why do you think the power transformer is bad?
Terry

---

Re: Philco Model 84 - Bad Transformer? - Brian - 11-28-2011

Hi,

The Transformer run very hot, and starts to boil (bubbling sound) at about ~35V.

I haven't had a chance to check the current yet, but I've ohmed out the wiring, and I didn't find any shorts.

Thanks,
Brian

---