Philco 60 resistor wattages? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 60 resistor wattages? (/showthread.php?tid=4343)

---

Philco 60 resistor wattages? - lyle - 02-29-2012

Hello all,

This is my first post. I am working on a Philco 60. I've noticed a few of you have restored this great old radio and was hoping I could get some help on the proper wattage of the resistors. As you know, this information is not given in the schematics. It was suggested by someone on the Antiqueradios forum that they routinely replace the flexible wire-wounds with 2 Watt and suggested that 2 Watts would work for all the resistors in the chassis.

Thanks,

lyle

---

RE: Philco 60 resistor wattages? - Steve Davis - 02-29-2012

Here, this might help. http://www.philcorepairbench.com/resistcompare.htm

Steve

---

RE: Philco 60 resistor wattages? - lyle - 02-29-2012

(02-29-2012, 05:44 PM)Steve Davis Wrote:  Here, this might help. http://www.philcorepairbench.com/resistcompare.htm

Steve

Thanks, Steve

I just found the values on the Philco parts values on the PhilcoRepairBench page.

Between you and that I think I've got it.

Thanks again, Steve

---