cap polarity - Printable Version
+- The PHILCO Phorum (
https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (
https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (
https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: cap polarity (
/showthread.php?tid=4978)
cap polarity -
murf - 07-14-2012
Recently bought some electrolitics from mouser,and one of them is a 22uf 50volt 20% cap made by Vishay.
Cannot tell which end is positive.
It is an axial cap with one end having a sharp 90 degree corner with a black stripe on that end.
The other end has a 45 degree chamfer and no markings.
Just looks like a typical axial cap with one end having a chamfer and the other end having no chamfer,but a black stripe on that end.
Anyone know which end is which on this cap?
Thanks
murf
RE: cap polarity -
morzh - 07-14-2012
murf,
You'd make it so much easier for us to help you if you either provided a picture, or better yet the full part number or mouser cat#. Why spent so many words describing when you know what picture is worth ( a thousand words)?
RE: cap polarity -
murf - 07-14-2012
If I could figure out how to post a picture,I would have done that.
The mouser pn is 594-2222-138-21229
Mfg pn is mal213821229e3.
Looked at both and could not find anything that states polarity.
Thanks for the help.
murf
RE: cap polarity -
Bob Andersen - 07-14-2012
Here's the datasheet for that part #:
http://www.vishay.com/docs/28332/138aml.pdf
The end with the chamfer / crease is positive.
RE: cap polarity -
murf - 07-14-2012
OK,
Thanks for your help.
murf
RE: cap polarity -
Ron Ramirez - 07-14-2012
Quote:If I could figure out how to post a picture,I would have done that.
http://www.philcoradio.com/phorum/showthread.php?tid=29
http://www.philcoradio.com/phorum/showthread.php?tid=4371
Why is this so difficult for people? Seriously...I'd really like to know.
RE: cap polarity -
morzh - 07-15-2012
See? took me under a minute to look in the datasheet. Figure 2.
Chamfered is positive.