Philco 45C Bakelite Blocks - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 45C Bakelite Blocks (/showthread.php?tid=5009)

---

Philco 45C Bakelite Blocks - francois8890 - 07-25-2012

I am working on restoring my 45C Butterfly radio and have just started rebuilding the bakelite blocks. When I looked up the blocks on the website I can find the 3793 E ok but I also have a 4989 Z and a 4989 AM showing on the schematic. I don't find either one of those on the workbench website. Am I missing something? I can probably do this without the information but I like printing the info out and having it in front of me while I'm working on the set. Any ideas?
Thanks,
Frank

---

RE: Philco 45C Bakelite Blocks - Chuck Schwark - 07-26-2012

Frank,

The Philco Repair Bench part listing for bakelite block condensers is not all inclusive - just the types used in earlier models.

The cap values in your blocks are given in the parts listing in the service info.

Chuck

---

RE: Philco 45C Bakelite Blocks - francois8890 - 07-26-2012

Thanks Chuck,it is such an excellent resource. Just using it as a crutch I guess. Didn't know it wasn't all inclusive. Yes I have the parts values.I was kind of making a little cheat sheet for every one I have rebuilt so far and printing a copy of the diagram as shown for each block with notes for my own library.

Thanks again,

Frank

---

RE: Philco 45C Bakelite Blocks - Chuck Schwark - 07-26-2012

No problem. I does state, however, at the top of the Parts page that the listings are not all inclusive.



Chuck

---