Anyone have a 41-608? help please - Printable Version
+- The PHILCO Phorum (
https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (
https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (
https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Anyone have a 41-608? help please (
/showthread.php?tid=5040)
Anyone have a 41-608? help please -
rocket88 - 08-05-2012
I have a 41-608 that I recapped and I believe I have a cap with 1 leg in the wrong position. The unit worked after I replaced all the coupling caps and I foolishly moved one leg of one of them and now does not work. I have been over the schematic many times and can't seem to find it. This was a stupid mistake and I am fairly new to this. Anyone have one of these and can get some pictures of the underside of the chassis where the couplers are soldered? I know its a long shot but have to ask. Thanks in advance for any help. This is a wonderful radio and want to see it live again!
RE: Anyone have a 41-608? help please -
Radioroslyn - 08-05-2012
Where is the side that is connected connected to???
Terry
RE: Anyone have a 41-608? help please -
rocket88 - 08-05-2012
They are all hooked up, and according to the schemantic, correctly. I know theaudio side is working, I get a nice hum when I touch the volume control.
RE: Anyone have a 41-608? help please -
morzh - 08-05-2012
What cap is it?
RE: Anyone have a 41-608? help please -
rocket88 - 08-06-2012
Its one of the. 05s that run beside the XXL tube and the 1st. Rf tube 7b7. There is a strip of tie points and I think Its one of those.
RE: Anyone have a 41-608? help please -
rocket88 - 08-06-2012
Also, this is a 122 model.
RE: Anyone have a 41-608? help please -
TA Forbes - 08-06-2012
Give us a reference number from the schematic for the component(s) in question, so we are starting from the same place.