The PHILCO Phorum
Do I need an intervention? - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Do I need an intervention? (/showthread.php?tid=5313)

Pages: 1 2


Do I need an intervention? - LASJayhawk - 10-09-2012

Just asking.


RE: Do I need an intervention? - rocklandman - 10-09-2012

Not really only 3? when you get to 150 let us know, then it might be time!!
Rock


RE: Do I need an intervention? - Arran - 10-09-2012

Fix up the best one of the three, borrowing parts from the others if you have to, and use the other two for trade stock. That is unless you like these so much that you want on on every floor.
Regards
Arran


RE: Do I need an intervention? - LASJayhawk - 10-10-2012

they are all good.... I have a thing for 48-482's


RE: Do I need an intervention? - Phlogiston - 10-10-2012

That is the "top of the line" table radio and on top of the top of the line and on top of that - - -


RE: Do I need an intervention? - Glenn Roberts - 10-10-2012

LOL!! Someone asked me the same thing about the 2 37-116x's and 2-37-116B's I have. I just like them..what else can you say.

Glenn


RE: Do I need an intervention? - Ron Ramirez - 10-10-2012

37-116B???


RE: Do I need an intervention? - Glenn Roberts - 10-10-2012

Sorry, still sleepy, I meant. 116b, not 37-116b.

Glenn


RE: Do I need an intervention? - PhilcoMike - 10-10-2012

You only need an intervention if you have them stacked in ascending serial number order......Icon_mrgreen

Great radios!

Mike


RE: Do I need an intervention? - codefox1 - 10-10-2012

Not yet.


RE: Do I need an intervention? - TA Forbes - 10-10-2012

I'm not into much past 1938, but the 48-482 is an excellent set!

No need for an intervention.


RE: Do I need an intervention? - LASJayhawk - 10-10-2012

FWIW:

Chassis # A49671 has the label (P/N 39-8507) that shows a 6SQ7GT for the 1st audio
Chassis #A 63512 and A66684 have label (P/N 39-6810) that shows the 7B6

all 3 have the 7B6 of course.

The center one has had the cabinet redone at some point, the Philco decal has the wrong font on the H. I have not pulled the chassis yet (I just got the set) so I'll have to see how much work needs to be done to it.

The bottom one still has the original C102 filter cap, and has no leakage. Almost every paper cap leaked, but the filter is as good as the day the set was built.


RE: Do I need an intervention? - jerryhawthorne - 10-11-2012

John, I do believe you have a serious problem. I would be happy to help and pay shipping if you need a little relief from your affliction.
Jerry (not too far away from you, Arizona)


RE: Do I need an intervention? - Phlogiston - 10-13-2012

We have 3 radios newer than 1940 and that is one of them.


RE: Do I need an intervention? - LASJayhawk - 10-14-2012

Well I pulled the chassis out of the one I just got, and boy was I surprised. ALL original from the power cord to the tubes. I don't think the radio ever went to the repair shop. Replaced C103/305 for a motorboating problem in FM all the screen grid bypass condensers and dropping resistors in the IF sections and C515 (a leaky silver mica) for an intermittent FM operation issue. Did an alignment and she runs like a...a.....a...like a PHILCO!