Tube tester setup for early tubes - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Tube tester setup for early tubes (/showthread.php?tid=5917)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Tube tester setup for early tubes (/showthread.php?tid=5917)
Tube tester setup for early tubes - BrendaAnnD - 02-05-2013
I have an I-177 tube tester. I would like to know if anyone has settings for
this unit for the following tubes:
UX-199
UX-120
UV-199
I've not had any luck yet finding the settings online.
TIA
RE: Tube tester setup for early tubes - Alan Douglas - 02-06-2013
The 99s are listed under 99, and a 120 could be tested with the same settings, at least to see if it functions. The UV199 has a different basing and you'll need either an adapter or clip leads (the adapter is safer, as it prevents mixups).