Another yes another Model 95 cap question - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Another yes another Model 95 cap question (/showthread.php?tid=6267)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Another yes another Model 95 cap question (/showthread.php?tid=6267)
Another yes another Model 95 cap question - simplex1040 - 03-21-2013
What are the values of the 2 silver flat caps attached to the chassis under the 24 tube sockets?
RE: Another yes another Model 95 cap question - Carl Travis - 03-21-2013
[Image: http://antiqueradios.com/gallery/d/154828-1/model+95+parts.jpg]
Can you identify the caps from this image?
RE: Another yes another Model 95 cap question - simplex1040 - 03-21-2013
[Image: http://i7.photobucket.com/albums/y295/deere101/model95parts2_zpsc4630555.jpg]
Not on the photo but flat silver boxes, where I drew red rectangles
One has 2 wires the other has 1
RE: Another yes another Model 95 cap question - simplex1040 - 03-21-2013
Like where #46 is pointing and to the left of it
RE: Another yes another Model 95 cap question - morzh - 03-21-2013
Not legible enough.....do they have screw on them?
RE: Another yes another Model 95 cap question - simplex1040 - 03-21-2013
[Image: http://i7.photobucket.com/albums/y295/deere101/boxes1_zps2c112515.jpg]
These two silver boxes
RE: Another yes another Model 95 cap question - morzh - 03-21-2013
Oh those...those are 0.2uF in Philco 20, for example (tin boxes).
Easily disassembled. I rebuilt mine - it was, I think, a dual one. The box is one of the two cap's terminals and is grounded.
You need your chassis pic with numbering like the one 20 has, and then just check against the BOM.
RE: Another yes another Model 95 cap question - simplex1040 - 03-21-2013
In the second post is the picture of the chassis with numbers However the caps are not pictured on it. My guess is one is cap 46 a dual .25 filament bypass since it appears to be across the filaments. The other one is a single cap however i do not know which number it is.
RE: Another yes another Model 95 cap question - morzh - 03-21-2013
In Philco 20 it was dual 0.25uF and single 0.5uF.
Possibly yours have some numbering on them.
If yes - this is your source.
http://philcorepairbench.com/metalcap.htm
RE: Another yes another Model 95 cap question - simplex1040 - 03-22-2013
no numbers which is why I was asking the question.
RE: Another yes another Model 95 cap question - morzh - 03-22-2013
Well, figure out where the wires go, trace them in the schematic and see the listed values.