Lamp for Philco 46-427 - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Lamp for Philco 46-427 (/showthread.php?tid=6322)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Lamp for Philco 46-427 (/showthread.php?tid=6322)
Lamp for Philco 46-427 - joegatto - 03-27-2013
The schematic for this set calls for a I100 bulb for the panel light. It is a bayonet type but not a 44 or 47 6 volt bulb. Anyone knowe what it is? Thanks - Joe jdgatto@earthlink.net
RE: Lamp for Philco 46-427 - Carl Travis - 03-27-2013
Joe,
P/N 34-2068 is supposed to be a type 47 bulb:
http://www.philcorepairbench.com/lamps.htm
RE: Lamp for Philco 46-427 - joegatto - 03-27-2013
Thanks Carl. I see my mistake now. When I first tried a 47 it blew out immediately, probably a fluke. I then went to a 44 but that draws too much current. Will go to radio shack and pick up another 47 and try again. Joe
RE: Lamp for Philco 46-427 - Chuck Schwark - 03-28-2013
I100 is the schematic/parts listing designator - Indicator (lamps) 100.
Just like L for coils, T for transformers, C for caps, etc......
Chuck