Hello! - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Hello! (/showthread.php?tid=7413)

---

Hello! - fegravel - 09-08-2013

Hi!

I've recently joined the Phorum and I thought I should say a small bonjour!

This looks like a great forum. I'm sure it will be helpful many times!

I'm a young french canadian collector and I only own one Philco in my 25 sets collection. It is the model 60B (early version). I hope to get into the restoration during spring. We'll see!

Here's my website, if you're interested. I own a few canadian sets (some are rare as hen's teeth) and american radios.

radiosfelix.weebly.com

Have a nice day!

---

RE: Hello! - Ron Ramirez - 09-08-2013

Bonjour, Felix-Antoine! Welcome!

---

RE: Hello! - Jamie - 09-08-2013

Welcome! Glad to see you here!

---

RE: Hello! - fegravel - 09-08-2013

Thanks guys!

PuhPow : PuhPow was the sound my 14 tubes Rogers did yesterday...

Plus some fireworks, of course...

LOL

---

RE: Hello! - klondike98 - 09-08-2013

Welcome to the Phorum!!!

---

RE: Hello! - KCMike - 09-08-2013

Welcome , I think you will like it here.
Mike

---

RE: Hello! - codefox1 - 09-08-2013

Please post a schematic or link therero and specific questions you might have. Picture optional. But welcome!

---

RE: Hello! - Arran - 09-09-2013

If you need any help with some of your Canadian made sets I have worked on a fair number of Canadian makes and models over the years, especially C.G.E, RCA, Electrohome, and Rogers.
Regards
Arran

---

RE: Hello! - Eric T - 09-12-2013

Ciao e benvenuto, Fegravel.
I don't know any French, ma parlo un po Italiano.

---

RE: Hello! - fegravel - 09-12-2013

Thank you Philco people!

---

RE: Hello! - GarySP - 09-12-2013

Bonjour!! Je'ne parle Fracaise mais un petit peur!! (Hope I wrote that correctly, it's been 38 years since French class!) Welcome to the phorum. Great people on this site, with tons of help to share. Take care, Gary

---

RE: Hello! - AI2V - 09-13-2013

Terrific collection!!! I"m impressed!! And of course, welcome!

Pete

---

RE: Hello! - PhilcoJohn - 09-13-2013

Welcome to your........Your forum...We are all here to help.

---

RE: Hello! - codefox1 - 09-14-2013

If we can help you, let us know what model you are working on, ( link or scematic to,) an what you wnt to know. Get used to advice to change all the elecrolytic and paper capictors and all (or out of range) or all just anyway carbon resistors before firing the set up again.

Best of luck.

---