philco 42-1012 - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: philco 42-1012 (/showthread.php?tid=5703)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: philco 42-1012 (/showthread.php?tid=5703)
Pages:
1
2
RE: philco 42-1012 - Electrothaumaturgist - 01-31-2013
Murf, did you try to realign the set again. When I got my 42-400 first running, the volume was only about half of what it should be. The very first adjustment I made on it was at that #4 IF can,(first thing on the adjustment procedures), and lo and behold, that was it. (it was 99% tight, but that final 1% tightening did the trick- kind of strange that it worked full bore tight. All bands functioned normally). Not saying that is your problem, but a little food for thought, maybe.
RE: philco 42-1012 - murf - 01-31-2013
Guess that is something I could check next time.
Thanks