The PHILCO Phorum
Philco model 77 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco model 77 (/showthread.php?tid=15402)

Pages: 1 2

RE: Philco model 77 - flatheadjr - 09-18-2016

http://rs32.pbsrc.com/albums/d5/flatheadjr/Mobile%20Uploads/20160918_184814_zpsvfzeolty.jpg?w=480&h=480&fit=clip

Here's a photo of the ever elusive parts number page for this set, mine shows a different part number from the 2766, mine shows a 2848, is this the same opt?

RE: Philco model 77 - Radioroslyn - 09-18-2016

I couldn't find that #.  Look here  http://philcoradio.com/phorum/showthread.php?tid=215    under spkr zip.

RE: Philco model 77 - flatheadjr - 09-19-2016

Tried to open that thread, it says it doesn't exist

RE: Philco model 77 - Radioroslyn - 09-19-2016

Go to Philco Downloadable Files then Philco free download files it's in there under spkr zip file

RE: Philco model 77 - klondike98 - 09-19-2016

Here's the link directly to the speaker file:

http://www.philcoradio.com/phorum/attachment.php?aid=5181

It should directly download the speakers.zip file to your PC, then you need to unzip it to read it.

RE: Philco model 77 - flatheadjr - 09-20-2016

I finally found it and downloaded it, however last night I pulled the opt up to get a better look at it and have 2 loose solder joints. I don't know if this is the problem or not but I'll re solder and try again.

RE: Philco model 77 - flatheadjr - 09-20-2016

So I've gone back and soldered the broken contacts on the speaker to see if I'd get a different reading, it didn't seem to change the readings or voltages on the 45 tubes so it looks like I am now on the hunt for either a new speaker assembly or a new functioning output transformer. What's going to be the best way try to see if anything comes across ebay eventually or try a looking for ad?

RE: Philco model 77 - flatheadjr - 01-11-2017

Where did the rest of the thread go?

RE: Philco model 77 - Ron Ramirez - 01-11-2017

87 - http://www.philcoradio.com/phorum/showthread.php?tid=16059

77 - right here Icon_smile