The PHILCO Phorum
I need the technical manual model 46-806 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: I need the technical manual model 46-806 (/showthread.php?tid=14110)

Pages: 1 2

I need the technical manual model 46-806 - Macan - 02-23-2016

They gave me a radio Philco 46-806 model, which does not have a speaker, or your transformer.
I have the outline, but I need to know how the speaker, dial and needle is mounted.

RE: I need the technical manual model 46-806 - klondike98 - 02-23-2016

Welcome to the Phorum!
Icon_wave

I see you live in Spain! Greetings. Chuck Schwark should have that schematic, check with him at
http://www.philcorepairbench.com/schematics.htm

His schematics are only a few dollars and are very clear to read. I noticed that there was not a schematic available on the free Nostalgiaair Website.

RE: I need the technical manual model 46-806 - Macan - 03-03-2016

Hello klondike98, thank you very much for your answer, try to get it in the direction you set me.
Greetings

RE: I need the technical manual model 46-806 - Macan - 03-14-2016

I bought on eBay technical manual 46-806 Philco radio, to know how the speaker and the metal strip through which the needle slides dial is set.
As I mentioned in my first post, I have given me a radio Philco 46-806, which has the electrodynamic loudspeaker 4 "x 6", or the output transformer mounted speaker that comes with the speaker.
Deputy photographs radio I have, and what I need to know (with some photos, or documents), as is the detail is fixed:

1 When the speaker chassis.
2 The metal strip where the dial needle slides, speaker.
3rd transformer speaker, the speaker itself.

My intention is :

1º- Locate a speaker 4 "x 6", permanent magnet and an output transformer speaker.
Modify 2º- filter power supply, replacing the original speaker coil by a suitable power resistance.
Mount 3rd secured to the chassis, the set, transformer, speaker and metal strip through which the needle slides dial and dial montra rope for signaling dial needle work.

So I ask for help, for details of how fixed to the chassis of the radio, speaker, speaker transformer, and the upper metal needle tita where this radio dial slides.

regards

RE: I need the technical manual model 46-806 - Macan - 03-20-2016

Hi, can someone help me please

RE: I need the technical manual model 46-806 - Ed Locker - 03-20-2016

(03-20-2016, 12:52 PM)Macan Wrote:  Hi, can someone help me please

Here's some pictures that may help.

http://elgramoforo.esforos.com/philco-46-806-1946-modificado-para-espana-t10864

RE: I need the technical manual model 46-806 - Radioroslyn - 03-21-2016

+1
Can't read any of it but the pic's are nice!!!!

Terry

RE: I need the technical manual model 46-806 - morzh - 03-21-2016

The "beak" knob does not seem to belong. It is from 1937-1938 radios for band switching.

RE: I need the technical manual model 46-806 - Macan - 03-21-2016

Thanks for your answer Ed Locker, but had seen these pictures before and could see the speaker to the metal part where the needle on the dial slides is held, but I need to see how the speaker to the chassis is held, and these photos do not it shows.

RE: I need the technical manual model 46-806 - Macan - 03-30-2016

Please, can anyone help me?

RE: I need the technical manual model 46-806 - Macan - 03-30-2016

Hello morzh, as you see the "beak" knob  if it belongs to the radio.
The photo attached is another radio of this model, which I found in Internet

RE: I need the technical manual model 46-806 - kiwi_steve - 03-30-2016

I don't have one, so this is just an educated guess.

The speaker - which has an unusual large metal frame and is probably specific to this model or a few similar models - is most likely bolted to the chassis where the two clear strips are just behind the indent on the chassis (probably mounted from the magnet area - you can just see one in this photo http://postimg.org/image/zdvzpr5nh/ to the right of the IF can), and the dial assembly is bolted to the top of the speaker.

The speaker is part of the mechanical assembly for the front of the radio, almost like the engine in a motorbike often forms part of the frame... so not having the original one might be a problem. If you do not find an original speaker then you will need to make a suitable bracket(s) to mount everything in the correct place. I suspect those speakers will be very hard to find unless you can find another radio for parts.

Cheers

Steve

RE: I need the technical manual model 46-806 - Macan - 03-30-2016

Thanks kiwi_steve for your answer, I think you're right in everything you say.
I keep looking for help, and if you do not owe a supported as a speaker for me to get

RE: I need the technical manual model 46-806 - Macan - 04-09-2016

Please, can anyone help me?

RE: I need the technical manual model 46-806 - Eliot Ness - 04-10-2016

This radio was not sold in the United States so not not many collectors own one of these.   Your best best bet is to do a Google search for a Philco 46-806 and contact every person for a picture to help you out.  Otherwise, keep searching eBay for a similar radio.

I have located 2 or 3 nice chassis pictures, but they are all from the back and don't show how the speaker mounts.