Philco k-6 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco k-6 (/showthread.php?tid=18009)

---

Philco k-6 - mg34.42 - 02-26-2018

I’m looking for the specifications for the Philco K-6 speaker field coil Looks like I’m going to have to use a permanent magnet speaker I can’t seem to find a K-6 speaker
Benny

---

RE: Philco k-6 - sam - 02-26-2018

benny
go to philco files for free down load      http://philcoradio.com/phorum/showthread.php?tid=215
scroll down to attached files  down load speaker zip
look  at line 86

sam

---

RE: Philco k-6 - Brad Winder - 02-28-2018

Hi Benny,
According to Philco Service Bulletin #180-A, the K-6 (which is also listed as a replacement for the K-5) has the following specs:
-Field coil resistance 3275 ohms D.C.
-Voice coil resistance 1.1 ohms D.C.
-Output transformer primary resistance 680 ohms D.C.

---

RE: Philco k-6 - Steve Davis - 02-28-2018

You could use a K-2 from an early 90 (2-45),not an exact match electrically but close enough.

Steve

---