46-1201 - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 46-1201 (/showthread.php?tid=19675)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 46-1201 (/showthread.php?tid=19675)
46-1201 - cougar01 - 02-19-2019
Planning on restoring a Model 46-1201 (Build 125) Bing Crosby in a few months, and am trying to locate a few parts beforehand. I found on another post the part number for a replacement Idler Wheel for the M-7 turntable. However, has anyone found a suitable replacement for the 2 "sleeves" on the guide rollers? Mine appear quite worn, and have seen better days. If there was a replacement available, I'd like to swap those out. I also have info from other posts regarding the needle assembly in case I need to change cartridges. Any other issues with these units that I should be aware of ahead of time other than the standard replacement of caps and any resistors as needed? Thanks!