The PHILCO Phorum
Philco 70 Cathedral - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 70 Cathedral (/showthread.php?tid=22141)

Pages: 1 2

Philco 70 Cathedral - 462ron - 02-10-2021

Hi all, I’ve seen notes on service info concerning the 70 that there’s a difference between serial# B22,000 or above or below. I’m just starting on my 70 and the only number I see stamped on the rear apron of the chassis is 556792, no B in front of it so what exactly do I have? Thanks.

Ron

RE: Philco 70 Cathedral - Radioroslyn - 02-10-2021

If it has a dual gang volume control it's the early model.

RE: Philco 70 Cathedral - 462ron - 02-11-2021

Thanks Terry, early version is what I got then!

Ron

RE: Philco 70 Cathedral - 462ron - 02-24-2021

            So in testing the tubes and general cleanup of my 70, I have discovered a little history behind my radio. I’ve seen 4 or 5 station call letters printed in pencil on the dial scale. Turns out they were all Detroit area stations. Then I find this sticker on one-off my 24 tubes. It’s from some shop in Detroit also. There’s what I presume is the set owners name printed on the back arch support! I wonder about how it made its way to me from Detroit to the Kutztown swap meet 4-1/2 years ago?
 
 On another topic. What are you guys using for grille cloth? Looks like Richmond Designs is gone and I only find generic cloth on eBay! Thanks.

RE: Philco 70 Cathedral - patrician56 - 02-24-2021

Have you tried this URL for Richmond ?
https://www.richmonddesignsinc.com/

He also sells on Ebay.

RE: Philco 70 Cathedral - patrician56 - 02-24-2021

AH, I see that the Home Page for Richmond designs is not operative.

RE: Philco 70 Cathedral - Radioroslyn - 02-24-2021

Maybe:
https://richmonddesignsinc.com/grille_cloth_page_sizes_18_x_24_and_24_x_24
But there isn't a good replacement for the 70/90 grille cloth.

RE: Philco 70 Cathedral - 462ron - 02-25-2021

Ah there it is. Thanks guys. I don’t know why I couldn’t find Richmond designs. When I googled it and clicked, it came up 404! I’m a ways off yet from needing the grille cloth but will contact Richmond! Now onto cleaning up my dirty and slightly rusted chassis and electronic resto!

Ron

RE: Philco 70 Cathedral - Radioroslyn - 02-25-2021

Have a look here and see if anything strikes your fancy.  SPEAKER-FABRIC-SUPPLY | eBay Stores
Don't have my glasses on so can't see what they look like

RE: Philco 70 Cathedral - 462ron - 02-25-2021

Thanks Terry, looks to be a few possibilities there! Icon_thumbup

Ron

RE: Philco 70 Cathedral - Steve Davis - 02-25-2021

Richmond Designs "Whiskey Rayon" is the one you need.

Steve

RE: Philco 70 Cathedral - 462ron - 02-25-2021

Thanks Steve, that pin points it for me! Icon_thumbup

EDIT: Just ordered it, thanks again!

Ron

RE: Philco 70 Cathedral - 462ron - 04-12-2021

Hi All, putting the dial back on my 70 and when the tuning gang is completely meshed, I can set the dial to read 55 but when I fully open it, I’m about a half inch beyond the 150 or high end of the dial. Can’t find anything in the Philco Library or Nostalgia Air as far as setting the dial before doing an alignment. Anyone have that info or should I just set my dial to split the difference between the low and high end of the dial. In other words, set it about a 1/4” below the 55 and that will give me a 1/4” above the 150 on the high end! Thanks.

Ron

RE: Philco 70 Cathedral - rfeenstra - 04-12-2021

both of my 70's and my 71 are set the same way. Just barely below 55 but way beyond 1500.

RE: Philco 70 Cathedral - 462ron - 04-12-2021

Ok thanks Rob! 

Ron