38-10 dial/pilot light - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 38-10 dial/pilot light (/showthread.php?tid=24004)

---

38-10 dial/pilot light - KrazyKars - 01-06-2023

Hi All! Relatively new to the hobby but enjoying immensely.  I have repaired my 38-10 to good working order however , despite the slit in the dial for a light, there is no pilot/dial light assembly and no evidence of any clipped lines that once fed a light.  It must have had a dial light or there wouldn't be a slit for it to shine thru.  Would someone be kind enough to advise me as to possible hook up points and proper bulb? All comments greatly appreciated.

---

RE: 38-10 dial/pilot light - klondike98 - 01-06-2023

Welcome to the Phorum!


I have not worked on a 38-10 so can only go by the schematic info. The pilot lamp is a 34-2064 which translates to a #44 bulb (see https://philcoradio.com/library/index.php/parts/lamps/)

It connects into the filament string and ground. You can see the back of a 38-10 with the pilot lamp in its cone shaped housing in the photo on the following thread: https://philcoradio.com/phorum/showthread.php?tid=22318&pid=176924#pid176924

---

RE: 38-10 dial/pilot light - KrazyKars - 01-06-2023

Thanks!  This is just what I've been looking for!

---