Philco 41-221 Tenite Bezel - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 41-221 Tenite Bezel (/showthread.php?tid=24937)

---

Philco 41-221 Tenite Bezel - RodB - 03-12-2024

I just started restoration of a 41-221. I need to know how to remove the clips holding the tenite bezel on the cabinet. I didn't want to get too rough for fear of damaging the bezel.

---

RE: Philco 41-221 Tenite Bezel - RodB - 03-13-2024

So here's a couple photos of the bezel and clips.

   
   

---

RE: Philco 41-221 Tenite Bezel - Radioroslyn - 03-13-2024

Looks like you just need a pair of angled needle nose pliers to slip into the clip and give a squeeze and a giggle.

---

RE: Philco 41-221 Tenite Bezel - RodB - 03-14-2024

I was able to remove them using a small pair of long nose pliers. There wasn't much clearance to get the pliers under the clip but once I got a grip on it I was able to pinch and rock it back and forth. Looking at the photo, you can see that each side of the clip has a gripper barb to hold it in place.
   

---