Power transformer qquestion - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Power transformer qquestion (/showthread.php?tid=24965)

---

Power transformer qquestion - 45philcodon - 03-29-2024

I have just begun restoring a Model 38-620. The power transformer has obviously over heated in the past: wax leaking out of the transformer and splattered around the local area. All windings ohm out correctly.

Is this transformer safe for future use? In any case I intend to add an in-line 3/4 Amp fuse.

Thank you

Don

---

RE: Power transformer qquestion - Radioroslyn - 03-29-2024

Pull out the rectifier tube and run the set for 5 or 10 mins. If the transformer get warm or hot it's probably has shorted turns. Measure the HV ac from the each end to the centertap. Voltage should be within 10v or less.

---

RE: Power transformer qquestion - 45philcodon - 03-29-2024

Thanks, I'll try that

Don

---