Model 19 (89) Chassis Washer Thickness - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Model 19 (89) Chassis Washer Thickness (/showthread.php?tid=3334)

---

Model 19 (89) Chassis Washer Thickness - davemc - 06-05-2011

What is the correct thickness (new) for chassis washers for the model 19 (code 126) - I assume a model 19 chassis is almost the same as a Philco 89? It appears that the choices at http://www.renovatedradios.com/ are 7/8"d x 1/4"t, 7/8"d x 3/8"t, or 1"d x 1/4"t. It appears that the recesses in the cabinet will just accomodate 1" diameter washers, but 7/8"d could also be used.

But the thickness choices are 1/4" or 3/8", unless you guys know of another source. I just want the correct chassis height.

Thanks!

---

Re: Model 19 (89) Chassis Washer Thickness - etech - 06-08-2011

According to Mark Oppat at Old Radio Parts http://www.oldradioparts.net/rubber.html his part number PH-184 is correct for most 1930-1938 Philcos. These are 7/8 diameter by 3/8 thick.

I have successfully used both the 1/4 and 3/8 thick by 7/8 diameter on Philco 90's.

Ed

---