Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Fun With Laser Cutters
#1

I recently came across a company called Ponoko that will laser cut a design of your choice into a large number of materials.

As an experiment I decided to create a reproduction grille cloth backing cardboard for my 16B 'shouldered' tombstone since the original one was pretty shot (looks better than it is in the photo). Icon_smile

   

Here are the steps I took:

  1. scanned the original backing cardboard and cleaned it up in Photoshop
  2. opened the image file in Illustrator and used the 'Image Trace' feature to turn into into vector art
  3. simplified jagged edges and other imperfections (mostly to reduce cost since laser time = money)
  4. colored edges based on what I wanted Ponoko's lasers to do (blue = cut, red = engrave stroke, black = engrave area)
  5. created an account on Ponoko (they currently allow you to make your first product for free - up to $20)
  6. uploaded the Illustrator EPS file
  7. selected material (boring old corrugated cardboard)
  8. placed the order
Here is what arrived in the mail:

   

They send you the full piece of material you used - each side covered with white stick-on paper (looks like to protect the material while cutting).

   

Peel off the paper and...voila!

   

Cutting edge technology used to restore a 1935 radio.  Icon_lol

If you'd like to use the design for yourself, here it is (public domain - costs is just materials and shipping):

http://www.ponoko.com/design-your-own/pr...king-12624

I've attached the original EPS file too in case you want to modify it.


Attached Files
#2

Great job and good resource to know about!!
#3

If you like laser cutters check out this video. I want one!!!! David    

[Video: https://www.youtube.com/watch?v=iVrJUbeuG44]
#4

Pretty cool, nice to know that is available.
#5

(07-22-2015, 06:53 PM)David Wrote:  If you like laser cutters check out this video. I want one!!!! David    https://www.youtube.com/watch?v=iVrJUbeuG44

That thing is amazing! My favorite is the ping pong ball. 
#6

Part II

This time a new backer for my 16B 'Peak Top' Tombstone (the later version). The old backer was disintegrating so I decided to scan it in and go the laser cutter route again.

Rather than cardboard, this time I selected hardboard since the thickness of 0.118" is a close match for the original.
The design is available at Ponoko. I also attached the EPS file here in case you want to modify it.

It cost $30 total ($6 material, $14.80 laser cutting, $9.50 shipping). Yeah, not exactly cheap. But maybe it makes up for it in cool factor? Icon_smile Anyway, here was what Ponoko sent back:

[Image: http://i1072.photobucket.com/albums/w374...4m4d9j.jpg]

[Image: http://i1072.photobucket.com/albums/w374...u5eftx.jpg]

[Image: http://i1072.photobucket.com/albums/w374...7oilpa.jpg]

And here it is installed:

[Image: http://i1072.photobucket.com/albums/w374...i4xjfx.jpg]

[Image: http://i1072.photobucket.com/albums/w374...gn1fpb.jpg]

The cabinet still needs to be refinished, but I think having the right grille cloth installed is a big improvement!


Attached Files
#7

Why have I never seen this?

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

This thread or the radio? Icon_smile
#9

That's pretty slick, you did a great job.  You mention using Illustrator, is that an Adobe program?  

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#10

Yes - Illustrator is for working with 'vector' line art - as opposed to Photoshop which is primarily for pixel based 'bitmap' formats. There is some overlap and each program complements the other.

In this case I scanned the old backer into Photoshop first and cleaned up any imperfections in the scan (dust, tears in the original backer). The I imported that into Illustrator and used the 'Image Trace' feature to make the conversion to vector art.

Ponoko accepts a number of different vector file formats.
http://www.ponoko.com/make-and-sell/design-it-yourself
#11

Doesn't Mark Palmquist do laser cutting?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Nathan,
   That's really excellent. Thanks for sharing.
                                     Henry




Users browsing this thread:
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently 4224 online users. [Complete List]
» 1 Member(s) | 4223 Guest(s)
Avatar

>