Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New 1929-30 Philco Console Variant Found
#1

http://philcoradio.com/gallery2/1929c/#M...76_Console

http://philcoradio.com/gallery2/1930a/#C..._41_038_77

It was previously thought that the small Philco floor model known as "The Console" only came with first a 65 chassis and later a 76 chassis; and then after June 1930, as a model 30, 41 or 77.

Well, a new variant of this model has been found with a 96 chassis.

[Image: http://www.philcoradio.com/images/phorum/img_006.jpg]

[Image: http://www.philcoradio.com/images/phorum/img_007.jpg]

[Image: http://www.philcoradio.com/images/phorum/img_008.jpg]

It appears to be original, although a caveat should be added that it would be easy for anyone to remove a 77 chassis and install a 96 chassis since they were the same physical size and used the same speaker.

(No, I didn't buy it, but maybe I should have?)

--
Ron Ramirez
Ferdinand IN
#2

looks to be in very nice shape

go buy it Icon_twisted    not full size Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

I let go one in MA for a very low price, like $75. Just recently. Forgot what chassis.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

Heck, we all know Philco liked to use left-over cabinets. My model 30 should be in what I call the 'second-generation' lowboy cabinet, but it is in the same one originally used by the model 95 and such instead.

No matter where you go, there you are.
#5

Cute little consoles, and that one looks to be in pretty nice condition.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2860 online users. [Complete List]
» 3 Member(s) | 2857 Guest(s)
AvatarAvatarAvatar

>