Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater-Kent 60 console
#1

Here's the Atwater-Kent model 60 console I mentioned in a previous thread. Had it going fully for a short bit with no apparent issues, then the sound cut out. The good news is, after a recheck the speaker is just fine. My digital meter just doesn't have enough oomph to read all the windings in the field coil. It's plenty healthy. The bad news is, something on the chassis must have gave up the ghost. No funky smells or smoke, just kaput! Luckily all the expensive stuff seems fine yet. It will eventually live again. Icon_smile I guess not all radios can be like the Radiola 66 I bought years back for $35. Still works great! Icon_biggrin 

   

No matter where you go, there you are.
#2

I like the AK 60, not sure why. I have one my wife wants gone, but I'm reluctant to turn it out.

[Probably because it's in a cut-down cabinet. I keep hoping for a stretcher base to turn up, but it's been a year and a half and nothing reasonable yet. Maybe a nice Majestic 90 that someone wants rid of for $40? Nope, of course not. The only things I've seen are 4 hours away and the sellers want $350-450, usually in Canada.]

The grill design on yours is kind of unusual. I can't decide if I like it. But I do like the way that cabinet is toned. I hope if you refinish it, you manage to keep the coloring close to original!
#3

(06-18-2016, 03:33 AM)palegreenthumb Wrote:  I like the AK 60, not sure why.  I have one my wife wants gone, but I'm reluctant to turn it out.

[Probably because it's in a cut-down cabinet.  I keep hoping for a stretcher base to turn up, but it's been a year and a half and nothing reasonable yet.  Maybe a nice Majestic 90 that someone wants rid of for $40?  Nope, of course not.  The only things I've seen are 4 hours away and the sellers want $350-450, usually in Canada.]

The grill design on yours is kind of unusual.  I can't decide if I like it.  But I do like the way that cabinet is toned.  I hope if you refinish it, you manage to keep the coloring close to original!

  Yes, I've seen those listed on Vancouver craigslist too, and no matter how much the sellers wish they never sell. $150-200 might be in the ballpark for a working model 60 in good shape. Of course there are also what I call the "Cocaine Induced" prices, like the idiot who thinks his pair of early CB sets is worth $800, after three years and no takers he should have figured things out by now.
   With regard to A.K model 60s they seem to have been offered with several different cabinets, same with model 55s, but one thing you could do is put out an APB on the alternative forum and see if someone has a cabinet, either a good one or a junker that you could harvest the legs and stretchers off of. I think that there is also a swap meet in the Seattle area, there was one in Steveston just recently or soon too, maybe drop into one of those.
Regards
Arran
#4

I did just sell one of these, unrestored, but working (not guaranteed). As I was setting it up for sale it cut out. Also no drastic failure, just no sound. It turned out to be a rusty grid clip on one of the 224s. I have seen this before. Those AK clips were likely to corrode.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

I had to replace a grid clip on this one before I tried it out. It was loose on one of the 24's, so I lightly squeezed it and it crumbled. I would say a capacitor or resistor gave up the ghost as the sound just faded out and that was that. Checked the tubes, even swapped tubes with no change.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
Well I have found 315v on the rectifier when cold. Drops off to 280 after 15 minute warmup. Checked pin 3 on both 6F6 t...murf — 04:14 PM
Testing a speaker and output transformer Trutone A2-G
Thanks for the replies, I will check these ideas out and report back. murfmurf — 03:18 PM
Testing a speaker and output transformer Trutone A2-G
Sorry, my mistake. murfmurf — 03:07 PM
Testing a speaker and output transformer Trutone A2-G
MrFixr Honestly, I haven't done that yet and do not want to screw up the threads; maybe you could do it, or we could...morzh — 12:48 PM
Two small radios from France. Restoration and review.
Greetings; I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM
Philco model 38 code 121 not receiving signal.
Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM
Philco model 38 code 121 not receiving signal.
Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM
Philco Battery-WWII vintage
Seems to me that this a general purpose or radio filament 6V battery of very high amp-hour capacity and very high "...MrFixr55 — 08:08 AM
Testing a speaker and output transformer Trutone A2-G
Hi Morzh, From my end, no. I did not know that there are 2 threads on this topic. Maybe it should be combined.MrFixr55 — 07:13 AM
Testing a speaker and output transformer Trutone A2-G
Any reason for the 2nd copy of the thread?morzh — 10:22 PM

[-]
Who's Online
There are currently 342 online users. [Complete List]
» 1 Member(s) | 341 Guest(s)
Avatar

>