Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bullet Cabinet Question
#1

Morning All, I'm getting ready to attempt to refinish this 37-610, my question is; did some of these cabinets come from the factory without the usual stripes? It doesn't look like it's ever been refinished, and there is no evidence of where stripes might have been. Maybe I'm wrong and it was totally sanded years ago, but the chassis was 100% original. Thanks in advance.

Kelly


Attached Files Image(s)
   

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#2

Hi Kelly,

I have a maple version without the stripes:

[Image: http://i1072.photobucket.com/albums/w374...idgwix.jpg]

The finish is original as best as I can tell. This is based on the condition of the lacquer (some cracking due to age) and logo. I could also find no obvious evidence of the set having been stripped.

[Image: http://i1072.photobucket.com/albums/w374...8irzfb.jpg]

Another example of the 37-610T without stripes:
http://www.tuberadioland.com/philco-37-6...t_old.html
#3

Thank you Nathan.

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM

[-]
Who's Online
There are currently 4580 online users. [Complete List]
» 1 Member(s) | 4579 Guest(s)
Avatar

>